Loading ...
Loading ...
Loading ...
10
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
“Add Water”
indicator is on. Lack of Water.
Stop the ice maker, fill water,
and press “Power” button
again to restart the unit.
“Ice” indicator
is on. Ice is full in basket.
Remove ice from ice basket.
Continuous press “Select”
button 5 seconds, the unit
could make ice 10 cycles
even “Ice” indicator is on.
Ice cubes stick
together.
The ice making cycle
is too long.
Stop the ice maker, and
restart it when the ice blocks
melt. Select the small size
ice cube selection.
Water temperature in
inner tank is too low.
Replace the water.
Temperature of water
recommended at 45℉-90℉
Ice making cycle is
normal but no ice
formed.
Room temperature or
water temperature in
inner tank is too high.
The room temperature
should be 50℉-105℉, water
temperature should be
45℉-90℉
Refrigerant in cooling
system leaks.
Verify by a qualified
technician.
Pipe in the cooling
system is blocked.
Verify by a qualified
technician.
Loading ...
Loading ...
Loading ...