Loading ...
Loading ...
Loading ...
DSO8000 SERIES
Figure 2-59 The Cursor menu
The Cursors menu table
Menu Setting Description
Mode
Manual
Track
Auto
OFF
Set to Manual Mode
Set to Track Mode
Set to Auto Mode
Turn off the cursor measure
Type
X
Y
Shown as vertical line to measure the horizontal
parameters
Shown as horizontal line to measure the vertical
parameters
Source
CH1
CH2
MATH
Select the measurement signal source
Cursor A
Select Cursor A or not
Cursor B
Select Cursor B or not
The scope meter measures the Y or X coordinate values of the cursors, and the
increments between the two cursors.
To do cursor measurements, please do as the following steps:
1. Turn on the cursor measurement:
Cursor→Mode→Manual / Track / Auto.
2. Select channel Source for measurements by pressing soft button as:
Cursor→Source→CH1 / CH2 / MATH.
3. Select the cursors type by pressing soft button as Cursor→Type→ X or Y.
4. Press F4 or F5 to select the Cursor A or Cursor B.
5. Move the cursors to adjust the increment between the cursors.
The values will be automatically displayed on the right upper corner of screen when the
cursor function menu is hidden or displaying other menus.
Comments of Cursor Measurements
1. Auto Cursor Mode
The Auto Cursor Mode displays the cursors for the current measuring automatically. See
Loading ...
Loading ...
Loading ...