Loading ...
Loading ...
Loading ...
DSO8000 SERIES
to the scope meter may be occurred.
2. Push the
Utility
button and select
Calibrate.
The calibration screen is shown as in Figure 2-43.
Figure 2-43 The Calibration Screen
Note:
The scope meter must have been working or warm-up at least 30-minutes before
running calibration to get best accuracy.
The scope meter will calibrate parameter of vertical system (CH1, CH2).
Pass/Fail
The Pass/Fail function monitors changes of signals and output pass or fail signals by
comparing the input signal is within the pre-dened mask.
Press
Utility→Pass/Fail
to go to the following menu.
The Pass/Fail menu (Page 1/2)
Loading ...
Loading ...
Loading ...