Loading ...
Loading ...
Loading ...
good condition and optimise
your energy consumption by
following the instructions in
this installation and user
guide.
INSTALLATION
x If your appliance is fitted
with casters, then remember
that they should only be used
for short movements. Do not
move the appliance over long
distances on its casters.
x Clean the appliance before
connecting it to the mains.
Always unplug your
appliance before any
maintenance work. Never
pull on the power cord, but
only on the plug itself.
x Install the appliance in a dry
and well ventilated place.
x Avoid balconies, verandas
and patios, because
excessively high and low
temperatures in the summer
and the winter can prevent
your appliance from
functioning properly, or even
damage it.
x Do not place the appliance
near a source of heat, such
as an oven or a radiator.
x Leave at least 3 and 5 cm
clear around the sides and
10 cm above the appliance to
allow the air to circulate
freely.
x Place the appliance at a
suitable distance from the
wall using the spacers
contained in the bag of
accessories.
x Your appliance is
designed to function
optimally at a given ambient
temperature. In this case, it is
said to be designed for a
particular "climate class". The
climate class is shown on the
ID plate inside the appliance,
on the bottom of the left hand
wall. Beyond these
temperatures, the
performance of your
appliance may suffer.
Class Ambient temperature
SN + 10°C to + 32°C
N
+ 16°C to + 32°C
ST + 16°C to + 38°C
T
+ 16°C to + 43°C
Tips:
Once the appliance is
installed, adjust the feet so
that it is slightly inclined
rearwards. In this way, it will
be easier to close the door.
Before putting any food in the
fridge, clean the appliance
7
Loading ...
Loading ...
Loading ...