Sun Joe BDL-A0200 48-Volt IONMAX Cordless Garden Tiller + Cultivator Kit W/ 2 x 4.0-Ah Batteries + Dual Port Charger

User Manual - Page 8

For BDL-A0200.

PDF File Manual, 20 pages, Read Online | Download pdf file

BDL-A0200 photo
Loading ...
Loading ...
Loading ...
8
Unpacking
Carton Contents
Cordless tiller + cultivator with lower handle frame
Middle handle frame
Left upper handle
Right upper handle
Upper Handle frame
Handle knobs + bolts (4 sets)
Cable clips (2)
iON+ 24V lithium-ion batteries (2)
iON+ 24V lithium-ion dual-port battery charger
Manuals with registration card
1. Carefully remove the cordless tiller + cultivator and check
to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless
tiller + cultivator. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils
or small parts. These items can be swallowed and pose a
suocation risk!
Battery Pack Operation
The equipment is powered by two lithium-ion batteries. The
battery packs are completely sealed and maintenance free.
mWARNING! The cordless tiller + cultivator can only be
powered by both of the batteries together. One battery cannot
provide sucient power to the tool. Make sure to use two
batteries of the same voltage and the same capacity. Using the
tool with batteries of dierent capacity will cause damage to
the batteries.
mWARNING! Before rst use, the batteries require 55 min
charge time to be fully charged. When the batteries are at low
capacity, recharge for 55 min again before resuming operation.
Battery Charge Level Indicator
The battery packs are equipped with a push button for
checking the charge level. Simply press the push button to
read o the battery charge level from the LEDs of the battery
indicator:
All 3 level monitoring LEDs are lit: Battery charge level
is high.
2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
1 level monitoring LED is lit: Battery is at. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery’s service life will be greatly shortened.
NOTE: If the charge level button does not appear to be
working, connect the battery to the charger and charge
as needed.
NOTE: Immediately after using the battery pack, the charge
level button may display a lower charge than it will if checked
a few minutes later. The battery cells “recover” some of their
charge after resting.
Charger Operation
m
WARNING! Charge only iON+ 24V lithium-ion battery
packs with their compatible iON+ 24V lithium-ion charger.
Other types of batteries may cause personal injury
and damage.
To reduce the risk of electric shock, do not allow water to ow
into the charger's AC/DC plug.
When to Charge the iON+ 24VBAT-LTE
Lithium-Ion Batteries
NOTE: The iON+ 24VBAT-LTE lithium-ion battery packs do
not develop a "memory" when charged after only a partial
discharge. Therefore, it is not necessary to run down the
battery packs before placing them into the charger.
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
Light IndicatorsLights
Loading ...
Loading ...
Loading ...