Loading ...
Installation & wiring
*
Coverage area
Line(Hot), Red lead to Load wire, White lead to Neutral wire, Green
4. Gently position wires in wall box, attach sensor switch to the box.
3. Mount device “TOP”up.
5. Restore power at circuit breaker or fuse, wait
Wiring Diagram:
2. Connect lead wires as WIRING DIAGRAM (see Figure 1): Black lead to
6. Remove the small cover plate.
8. Replace the small cover plate after testing and adjustment.
lead to Ground.
one
minute.
1. Make sure that the power has been turned OFF at the circuit breaker.
Neutral
White
Hot
Black
Ground
Green
Load
Red
Neutral(White)
Load
40'
Top View
20'
10'
20'
10'
20'
5'
4'
Figure 1
7. Locate the adjustment trimpots on the control panel to perform test
and adjustment.
PIR Coverage: 1200 ft
Ultrasonic Coverage: 400 ft
2
2
Loading ...