Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/26349743-24v-suv1/bg8.png)
8
6. Screw both sprockets into the two remaining wheels using
three ST4
x
12 round head screws for each wheel (Fig. 6).
7. Slide a motor, a wheel, a washer and a lock nut onto either
sideoftherearaxle.Repeatfortheothersideandusethe
pair of socket wrenches to tighten both lock nuts at the
same time before installing the hub caps (Fig. 7).
NOTE:Themotorsaremarked(L)forleftand(R)forright
to indicate the side of the axle they need to be installed at.
8. Connect the motor cables to the motor controller (Fig. 8).
Fig. 6
Sprocket
ST4
x
12 round
head screws
Fig. 7
Motor
Washer
Axle
Wheel
Hub cap
Lock
Nut
9. Place the seat over the motor compartment and secure
it on both corners using the two remaining ST4
x
12 truss
head screws (Fig. 9).
10. Connect the steering wheel cable before installing the
steering wheel onto the steering column (Fig. 10).
Fig. 8
Motor
Motor
Fig. 9
Seat
ST4
x
12
truss head
screws
Fig. 10
Steering wheel
Steering
wheel cable
Loading ...
Loading ...
Loading ...