Loading ...
Loading ...
Loading ...
8
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock.
The range must be turned off.
To turn on: press and hold the
@ symbol for approx. 4
seconds. The
@ indicator lights up for 10 seconds. The range
is locked.
To turn off: press and hold the
@ symbol for approx. 4
seconds. The lock is now deactivated.
The hob is locked
If a hotplate is programmed with the hob locked, the following
will occur:
■ On the hotplate's indicator, ‹ will flash or the residual heat
indicator will flash alternately with
‹.
■ The indicator light over the symbol @ will come on.
Switch off the hotplate. Switch off the lock.
Activating and deactivating the childproof
lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
See the “Basic Settings" section.
The Powerboost Function
The Powerboost function can be used to heat food more
quickly than using the power level
Š.
Use limitations
This function may be used for all hotplates, provided that the
other hotplate in the same group is not switched on (see
figure). Otherwise,
› and the power level will flash on the
selected hotplate display; the previously selected power level
will then be automatically set, without turning on the function.
To turn on:
1.Select the required power level.
2.Press the boost G symbol of the selected hotplate. The ›
indicator lights up. The function has been turned on.
To deactivate
Press the boost G symbol. The display › goes out. The
function will be deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. The ”, ‰ symbol and the residual
heat indicator
•/œ flash alternatively in the display.
When the control is turned to setting 0, the indicator goes off.
The hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
*URXS
*URXS
*URXS
*URXS
Loading ...
Loading ...
Loading ...