Panasonic NN-SE995S Cyclonic Inverter Microwave Oven

Operating Instructions - Page 27

For NN-SE995S. Also, The document are for others Panasonic models: NN-SE795S

PDF File Manual, 36 pages, Read Online | Download pdf file

NN-SE995S photo
Loading ...
Loading ...
Loading ...
25
Timer Feature
This feature allows you to program the
oven as a kitchen timer. It can also be used
to program a standing time after cooking is
completed and/or to program a delay start.
To Use as a Kitchen Timer:
Example: To count down 5 minutes.
1.
• Touch Timer once.
2.
Swipe
• Set time by touching
“+”/”-” or swipe the
slider bar to 5 min-
utes.
3.
• Touch Start.
Time will count
down without oven
operatings.
To Set Stand Time:
Example: To cook at P6 power for 3
minutes with stand time of 5
minutes.
1.
Touch 5 times
• Enter the desired
Power level (see
page 16 for direc-
tions).
2.
Swipe
• Set cooking time,
touching “+”/”-” or
swipe the slider bar to
3 minutes.
3.
• Touch Timer once.
4.
Swipe
• Set stand time, touch-
ing “+”/”-” or swipe the
slider bar to 5 min-
utes.
5.
• Touch Start.
Cooking will start.
After cooking, stand
time will count down
without oven
operating.
CAUTION:
If oven lamp is lit while using the timer
feature, the oven is incorrectly pro-
gramed. Stop oven immediately and re-
read instructions.
To Set Delay Start:
Example: To delay the start of cooking
for 5 minutes, and cook at
P6 power for 3 minutes.
1.
• Touch Timer once.
2.
Swipe
• Set delay time by
touching “+”/”-” or
swipe the slider bar to
5 minutes.
3.
Touch 5 times
• Enter the desired
Power level (see
page 16 for direc-
tions).
4.
Swipe
• Set cooking time,
touching “+”/”-” or
swipe the slider bar to
3 minutes.
5.
• Touch Start.
Delay time will
count down. Then
cooking will start.
NOTES:
1. When each stage finishes, a two-beep
signal sounds. At the end of the pro-
gram, the oven will beep five times.
2. If the oven door is opened during Stand
Time, Kitchen Timer or Delay Time, the
time in the display will continue to count
down.
3. Stand time and Delay start cannot
be programmed before inverter turbo
defrost, sensor or other auto features.
This is to prevent the starting tempera-
ture of food from rising before defrosting
or cooking begins. A change in starting
temperature could cause inaccurate
results.
4. The maximum programmable time of
Standing Time, Kitchen Time or Delay
Time is up to 90 minutes.
F0003BP23CP_En.indd 25 2017/12/20 9:14:22
Loading ...
Loading ...
Loading ...