Loading ...
Loading ...
Loading ...
24 HCE710A, HME710A
Fig. 30
3 1. Insert screwdriver into groove of auger shaft and pry
shaft outwards (Fig.30.1).
32. Insert retainer into groove (Fig.30.2), ensure that
retainer is aligned with hole in spacer.
1
2
Fig. 31
33. Install screw and tighten (Fig.31.1).
1
Fig. 32
34. Connect gear motor wires and ground wire.
WHITE
GRAY
GROUND SCREW
Loading ...
Loading ...
Loading ...