MAVIC 3 PRO User Manual

Loading ...

DJI Mavic 3 Pro User Manual

Advanced Pilot Assistance Systems (APAS 5.0)

The Advanced Pilot Assistance Systems 5.0 (APAS 5.0) feature is available in Normal mode and

Cine mode. When APAS is enabled, the aircraft will continue to respond to user commands and

plan its path according to both control stick inputs and the ight environment. APAS makes it

easier to avoid obstacles, obtain smoother footage, and provide a better ying experience.

Keep moving the control sticks in any direction. The aircraft will avoid obstacles by ying above,

below, or to the left or right of the obstacle. The aircraft can also respond to the control stick

inputs while avoiding obstacles.

When APAS is enabled, the aircraft can be stopped by pressing the Flight Pause button on the

remote controller. The aircraft brakes and hovers for three seconds and awaits further pilot

commands.

To enable APAS, open DJI Fly, enter Settings > Safety, and enable APAS by selecting Bypass.

Select Normal or Nifty mode when using Bypass. In Nifty mode, the aircraft can fly faster,

smoother, and closer to obstacles obtaining better footage while avoiding obstacles. However,

the risk of crashing into obstacles will increase. Fly with caution.

Nifty mode cannot work normally in the following situations:

1. When aircraft orientation changes rapidly ying near obstacles.

2. When ying through narrow obstacles such as canopies or bushes at high speed.

3. When ying near obstacles that are too small to detect.

4. When ying with the propeller guard.

Landing Protection

Landing Protection will activate if Obstacle Avoidance is set to Bypass or Brake and the user

pulls the throttle stick down to land the aircraft. Landing Protection is enabled once the aircraft

begins to land.

1. During Landing Protection, the aircraft will automatically detect if an area is suitable for

landing, and then land the aircraft.

2. If the ground is determined to be unsuitable for landing, the aircraft will hover when the

aircraft descends to 0.8 m above ground. Pull down on the throttle stick for at least five

seconds, and the aircraft will land without obstacle sensing.

• Make sure to use APAS when the vision systems are available. Make sure there are no

people, animals, objects with small surface areas (e.g., tree branches), or transparent

objects (e.g., glass or water) along the desired ight path.

• Make sure to use APAS when the downward vision systems are available or the GNSS

signal is strong. APAS may not function properly when the aircraft is ying over water or

snow-covered areas.

• Be extra cautious when flying in extremely dark (<300 lux) or bright (>10,000 lux)

environments.

• Pay attention to DJI Fly and make sure APAS is working normally.

• APAS may not function properly when the aircraft is ying near ight limits or in a GEO zone.

Loading ...

Dji MAVIC 3 PRO