Loading ...
Loading ...
Loading ...
ice Maker
ICE MAKER TIPS
1. Ice cubes stored too long may develop an odd flavor:
Empty the container and be sure the wire signal arm is in
its "down" or ON posit{onoThe Ice Maker will then produce
more ice.
2oOccasionally shake the container to keep ice separated.
3. Keep the wire signal arm in its "up" or OFF position until
the refrigerator is connected to the water supply or
whenever the water supply is turned of L
4. Certain sounds are normal when the ice Maker is
operating. They are:
oMotor operation
=Ice being loosened from the tray
= Ice dropping into the storage bin
= Running water
o Water valve opening or closing
For' more informationon these operations, see Normal
OperatingSounds.
5. Wash ice container in war m water with mild detergent,.
Rinse well and dry.
6. Stop the Ice Maker when cleaning the freezer or for short
vacations_
7_ If tile Ice Makerris to be turned off for a long period of
time, turn the water' supply valve to the closed position.
Keep your' refrigerator and freezer clean to prevent odor
build-up. Wipe up any spills immediately and clean both
sections at teast twice a year. Never use metallic scouring
pads, brushes, abrasive cleaners or strong alkaline solu-
tions on any surface° Do not wash any removable parts in
a dishwasher_
Always unplug the power cord from the waft outlet
before cleaning°
NOTE: Turningthe control to OFF does not disconnect
power' to the controls, light bulb, or' other electrical
components°
INSIDE
----7
Damp objects stick to cold 1
metal surfaces.. Do not touch refrigerated t
surfaces with wet or damp hands° L
Wash inside surfaces of the refrigerator' and freezer' with a
solution of 2 tablespoons baking soda in 1 quart warm
water. Rinse and dry thoroughly. Be sure to wring excess
water out of sponge or cloth before cleaning around the
controls, light bulb, or any electrical parts.
Wash removable parts such as shelves and drawers with
baking soda solution or mild detergent and warm water. Do
not use harsh cleaners on these surfaces. Rinse and dry
thoroughly. Clean the door gaskets with mild suds, rinse
with clear water' and wipe dry,
Do not use razor blades or other sharp instruments which
can scratch the appliance surface when removing adhesive
labels Any glue left from the tape or energy label can be
removed with a mixture of warm water and mild detergent,
or, touch the glue with the sticky side of tape already
removed° Do not remove the serial plate.
OUTSIDE
Wash the cabinet and handles with warm water and mild
{iquid detergent. Rinse well and wipe dry with a clean soft
cloth. Do not use commercial household cleaners,
ammonia, or alcohol to clean handles..
Clean stainless steel (some models) front and handles with
hot soapy water and a dishcloth_ Rinse with clean water
and a soft cloth. Wipe stubborn spots with an ammonia=
soaked paper towel, and rinse. Cleaners made especially
for stainless steel, such as Sheila Shine, trademark of
Sheila Shine, tnc.., Stainless Steel Magic, trademark of
Magic American Corp., or similar products are suggested.
Always follow manufacturer's instructions° Wash the rest of
the cabinet with warm water and mild liquid detergenL Rinse
well, and wipe dry with a clean soft cloth.
Remove any dust or dirt from the front of the toe grille
using a vacuum cleaner with its dusting tool attachment
Remove the toe grille (See Toe Grille Assembly Instructions
on page 14). While the grille is removed, vacuum the
backside of the grill and wipe with a sudsy cloth or sponge.
I _ To avoid damage and help ihe t
refrigerator:mn as efl,icienttyas possible, clean
the condenser and air vents periodica y. J
Periodically clean the condenser (black tubes and wires
beneath the refrigerator, behind the toe grille). Do not allow
lint or dust to accumulate on the coils_ Insert a long handled
brush or vacuum attachment between the two coils to bring
the lint forward.
I _ Use caution when cleaning in
the area of the cowlsSurfaces there may be
sharp,
10
Loading ...
Loading ...
Loading ...