Loading ...
Loading ...
Loading ...
16
Robert Bosch Hausgeräte GmbH
en
P
The
P
icon lights up when the child
lock is activated. At this point the
water heater is deactivated, but you
can still draw ambient water. To
learn more about this setting, read
thesectiontitled“Childlock”.
M
+
N
M
and
N
flash at the same time
if there has been no hot water
drawn for some time. For hygienic
reasons, set the temperature to
90°C or
Q
and draw hot water (1 x).
Extinguish
M
and
N
; the tempera-
ture last set lights up.
Using the appliance
General
Withthisappliance,youcanlterwaterand
dispense it at room temperature or heated
tospecictemperatures.
Ifyouhavequestionsregardingthelter
cartridge,contacttheBRITAConsumer
Serviceat08447424800(toll-free).
Note: The appliance is checked before
delivery, which means there may be some
isolated drops of water found. These drops
of water are harmless, simply remove with
a cloth.
Setting up the appliance
Beforeyouusetheappliancefortherst
time, do the following:
►
Removelm.
►
Unroll or push in the right amount of
cable from the cable compartment and
plug the cable into a power outlet.
►
Remove the water tank and clean it
thoroughly under running water.
►
Inserttheltercartridgeasdescribedin
the section titled “ BRITA MAXTRA water
ltersystem”.
►
Fill the water tank up to the max mark
with fresh, cold water. Use only non-
carbonated drinking water.
►
Replacethewatertankandpushitrmly
downward into place.
temp. set button
Press the temp. set button to cycle through
and select one of the temperature settings.
The selected temperature lights up.
Display elements
L
On this setting, ambient water will
be supplied.
70 °C
80 °C
90 °C
With the 70 °C, 80 °C and 90 °C
settings, the water will be heated to
the selected temperature.
Examples
70 °C–forwhitetea
80 °C–forgreentea
90 °C–forinstantbeveragessuch
as hot chocolate or coffee
Note: The temperatures at the
water outlet can vary by approxi-
mately±5%.
Q
At this setting, the water will be
boiled. This setting is suitable, for
example, for black tea or instant
soups.
M
When the
M
icon lights up, the
BRITAMAXTRAltercartridge
should be replaced. You can
continue to heat water. For informa-
tion about replacing the water
ltercartridge,seethesection
titled“BRITAMAXTRAwaterlter
system”.
Afterchangingthelter,holddown
the start/stop button for at least
2 seconds,
M
will cease to light.
O
The
O
icon lights up when the
watertankneedstoberelledoris
missing.Removethewatertank,ll
it with fresh, cold water and return it
to its correct position.
N
The N icon lights up when the
appliance needs to be descaled.
Always follow the instructions in the
“Descale”sectionwhenyoudescale
the appliance.
Loading ...
Loading ...
Loading ...