Loading ...
Loading ...
Loading ...
- 116 -
The problem Try this!
The message "Connecting
to Anynet+ device..." or
"Disconnecting from
Anynet+ device" appears
on the screen.
You cannot use the remote control when the TV is configuring Anynet+ or switching to a
viewing mode.
Use the remote control after the TV has completed the Anynet+ configuration or has switched
to a viewing mode.
The Anynet+ device won't
play.
You cannot use the play function when
Start Setup is in progress.
The connected device is
not displayed.
Check whether the device supports Anynet+.
Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the device is
connected to your TV with an HDMI cable. Some HDMI cables may not support Anynet+.
Check whether the HDMI cable is properly connected.
Go to
Anynet+ (HDMI-CEC) and see if Anynet+ (HDMI-CEC) has been set to On.
●
Settings General External Device Manager Anynet+ (HDMI-CEC)
Scan for Anynet+ devices again.
If the connection is terminated because there has been a power failure or the HDMI cable has
been disconnected, please scan for the device again.
The TV audio is not being
played through the AV
receiver.
Make sure that the AV receiver is connected to the TV's HDMI (ARC) port with an HDMI cable.
Confirm that the AV receiver is HDMI (ARC) compatible.
If the AV receiver is not HDMI (ARC) compatible, connect the TV and the AV receiver with an
optical cable.
I Have Trouble Launching/Using Apps
When apps aren't working, these steps may help resolve the problem.
The problem Try this!
I launched an app, but
it's in English. How can I
change the language?
Languages supported by the app may be different from the user interface language.
The ability to change the language depends on the service provider.
My application is not
working.
Check with the service provider.
Refer to the Help section on the application service provider's website.
Loading ...
Loading ...
Loading ...