Loading ...
Loading ...
02
Do not disassemble charger.
Do not expose charger to rain or snow.
DO NOT touch the exposed electrolyte or powder if the battery
casing is damaged.
Please make sure any battery charger(s) or charge controller(s)
are disconnected when working on the battery.
Use of an attachment not recommended or sold by the battery
charger manufacturer may result in a risk of fire, electric shock,
or injury to persons.
To reduce risk of electric shock, unplug charger from outlet
before attempting any maintenance or cleaning. Turning off
controls will not reduce this risk.
The charger outputs 10A and is intended for the use of charging
25.6V Lithium-iron phosphate (LFP, LiFePO4) batteries that can
handle the charge current.
Ensure that the LiFePO4 batteries include a PCM/BMS when
using this charger.
To reduce risk of damage to electric plug and cord, pull by plug
rather than cord when disconnecting charger.
Do not operate charger with damaged cord or plug – replace the
cord or plug immediately.
Do not operate charger if it has received a sharp blow, been
dropped, or otherwise damaged in any way.
Any uncovered battery material, such as electrolyte or powder,
that has contacted skin or the eyes must be flushed out with
plenty of clean water immediately. Seek medical attention
afterwards. Spills on clothing should be rinsed out with water.
DO NOT connect or disconnect terminals to/from the battery
without first disconnecting loads.
Loading ...
Loading ...
Loading ...