Loading ...
Loading ...
Loading ...
Transportation and storage
Transportation and storage
• Store and transport the product and fuel so that
there is no risk that any leakage or fumes comes
in contact with sparks or open flames, for example,
from electrical machinery, electric motors, electrical
relays/switches or boilers.
• When you store and transport fuel always use
approved containers intended for this purpose.
• When you store the product for long periods the
fuel tank must be emptied. Contact your local petrol
station to find out where to dispose excess fuel.
Drain the tank into the appropriate containers and
in a well ventilated area.
• Ensure that the product is cleaned and that a
complete service is carried out before long-term
storage.
• The transport guard must always be fitted to the
cutting attachment when the product is transported
or in storage.
• Secure the product during transport.
• In order to prevent unintentional start of the engine,
the spark plug cap must always be removed during
long-term storage if the product is not under close
supervision and when you perform all service
measures.
• Allow the product to cool before you put in storage.
Technical data
Technical data
525LK
Engine
Cylinder displacement, cm
3
25.4
Idle speed, rpm 3000
Recommended max. speed, rpm 9500
Speed of output shaft, rpm 6500
Max. engine output, according to ISO 8893, kW/hp @ rpm 1.5 / @ 8500
Catalytic converter muffler Yes
Ignition system
Spark plug NGK BPMR8Y
Electrode gap, mm 0.65
Fuel and lubrication system
Manufacturer/type of carburetor Walbro WTEA-8C
Fuel tank capacity, litre 0.51
Weight
Without fuel, cutting attachment and guard, kg 4.7
Noise emissions
1
1
Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive
2000/14/EC. Reported sound power level for the machine has been measured with the original cutting
attachment that gives the highest level. The difference between guaranteed and measured sound power
is that the guaranteed sound power also includes dispersion in the measurement result and the variations
between different machines of the same model according to Directive 2000/14/EC.
20 1027 - 003 - 09.06.2022
Loading ...
Loading ...
Loading ...