Loading ...
Loading ...
Loading ...
Se f-C ean Oven (seEect modeEs}
Note: For manuai dean oven, see page 18. 1
6. Wipe up sugary and acidic spiHovers such as sweet
potatoes, tomato, or milk-based sauces. Porcelain enamel
is acid-resbtant, not acid-proofi The porceiain finish may
discoior if acidic spills are not wiped up before a seif-cban
cycb.
o It is normal for parts of the range to become hot duripg a
self-clean cycle.
• To prevent personal injury and damage to the oven door
do not attempt to open door when "LOCK" is displayed.
o Avoid touching cooktop_ door. window or oven vent area
Do not use commercial oven cleaners on the oven finish
or around any part of the oven. They wiii damage the
finish or parts.
The self-clean cycle uses above-normal cooking temperatures
to automatically clean the oven nterior. Do not force the oven
door or lock lever open. This may result in exposure to high
temperatures and be a burn hazard.
It is normal for flare-ups, smoking, or flaming to occur during
cleaning if the oven is heavily soiled. It is better to clean the
oven regularly rather than to wait until there is a heavy build-
up of soii in the oven.
During the cleaning process, the kitchen should be well
ventilated to get rid of normal odors associated with cleaning.
Before Seff-C eaning
1. Turn off the oven light before cbaning. The light may burn
2. Remove broiler pan, all pans, and oven racks from the
oven. The oven racks wiii discolor and may not slide easily
after a self-clean cycle if they are not removed.
3. Clean oven frame, door frame, area outside of gasket, and
around the opening in the door gasket with a nonabrasive
cleaner such as Bon Ami* or detergent and water. The
self-cleaning process does not
clean these areas. They should be
cleaned to prevent soil from baking
on during the clean cycle. (The
gasket is the seal around the oven
door and window}.
4. To prevent damage, do not clean or
rub the gasket around the oven
door. The gasket is designed to seal in heat during the
clean cycle.
5. Wipe up excess grease or spillovers from the oven bottom.
This prevents excessive smoking, flare-ups or flaming
during the clean cycle.
To set Self-Clean:
Note: Oven temperature must be below 400° F to program
a clean cycle.
1. Close the oven door.
2. Move door lock lever right to the locked position.
3. Press the Clean pad. Clean
° CLEAN flashes in the display.
If the door is not closed, beeps wiii sound and "DOOR" wiii
display. If the door is not closed within 45 seconds, the
self-cleaning operation wiii be canceled and the display
will return to the time of day.
4. Press the A or Y pad.
° CL-M (Medium Soil, 3 hours} is displayed.
5. Press the A or _' pad to scroll
the self-cleaning settings.
CL-H (Heavy Soil, 4 hours}
CL-M @ledium soil, 3 hours}
CL-L (Light Soil, 2 hours}
Choosing the soil level of the oven automatically programs
the self-cleaning time.
6. After four seconds, the oven wiii start cleaning.
° The cleaning time wiii start counting down in the display.
° LOCK wiii appear in the display.
° CLEAN wiii appear in the display.
To Delay a Self-Omean Cycle:
1. Press the Delay pad. Delay
° DELAY flashes.
, 00:00 wiii appear in the display.
Press the A or V pad to set the amount of
time you want to delay the cycle. Delay time
can be set from ten minutes @0:10} to 11
hours, 59 minutes (11:59}.
eoeto
* Brand names for cleaning products are registered trademarks of the respective manufacturers.
15
Loading ...
Loading ...
Loading ...