Loading ...
Loading ...
Loading ...
EN – 6
TROUBLESHOOTING
No audio
Make sure your audio source is switched on and emitting a sound signal.
Check that the cables are connected correctly.
Check that the LED indicator is lit in a colour other than bright red.
Carefully increase the volume on the active speaker or remote control.
There is no sound through the Bluetooth connection
Make sure your audio source is switched on and emitting a signal.
Make sure the speaker is switched to Bluetooth input. The LED indicator must be permanently blue.
A fast blink means that no paired device is connected and the speaker is waiting to be paired. A slow
blink appears until pairing is complete or the audio source is not emitting any signal, e.g. by using BT
MUTE (PLAY/PAUSE).
Shorten the distance from the Bluetooth signal source. The maximum usable distance is about 10 m,
depending on the surrounding interference and obstacles. Near the range limit, the sound may be
unstable.
Disconnect the Bluetooth source by pressing and holding the BT button. Reconnect the speaker on
the side of your Bluetooth audio source.
Use another Bluetooth audio source.
Speaker cannot be switched on
Check the mains voltage, the power adapter, its cable and the correct connection of the power
connector.
TECHNICAL DATA
Power peak output: 200W (BS50), 100W (BS30)
Signal-to-noise ratio: L/R: ≥80 dB (A)
Input sensitivity: RCA: R/L: 650 ± 50 mV
Coaxial: R/L: 500 ± 50 mV
OPT: R/L: 500 ± 50 mFFS
Bluetooth: R/L: 700 ± 50 mFFS
Frequency range: 30 Hz – 30 kHz (BS50), 40 Hz – 18 kHz (BS30)
USB format: FAT/FAT32, WMA, MP3
Bass driver: 5.25“/140 mm (BS50), 4“/116 mm (BS30)
Treble driver: 1“ silk calotte
Power supply: with the supplied DC adapter 24 V (BS50), 21 V (BS30)
Batteries: 2 × AAA
Standby consumption: <0.5 W
Dimensions (w×h×d) each: 278 x 168 x 240 mm (BS50), 220 x 150 x 160 mm (BS30)
Weight each: 4 kg (BS50), 1.9 kg (BS30)
Loading ...
Loading ...
Loading ...