Loading ...
Loading ...
Loading ...
5
4. Setup
Caution! Read All Instructions and Warnings Before Installation!
Warning: Charging stations can be extremely heavy. Do not attempt to unpack the charging station without assistance.
Follow the unpacking instructions document that shipped with this product before proceeding with setup. Use extreme caution
when handling the charging station and be sure to follow all handling and installation instructions. Do not attempt to install
equipment without first stabilizing the charging station.
4.1 Power Requirements
4.2 Installing the Handle Bracket, Corner Safety Bumpers and Power Cord Manager
4.3 Adjusting Storage Shelf Dividers
The charging station must be plugged into an AC outlet with a dedicated circuit.
To install the handle bracket, choose a side on which to install the bracket (the same side as the cable access hole grommet and power cord manager
is recommended). Using the included hex key tool and four (4) hex screws, secure the handle bracket to the charging station cabinet
A
. Then install
the two top corner safety bumpers using four (4) hex screws (two per bumper)
B
.
To install the cord manager, use two (2) hex screws to secure on
the same side as the cable access hole grommet
C
.
Your charging station contains three non-removable storage shelves with adjustable
dividers.
To remove or rearrange the dividers, first open the rear door. Then push in the two tabs
securing the divider to the rear end
1
, pull the divider up to disengage from the shelf
tray
2
, and pull out to remove
3
. Repeat as necessary for additional shelf dividers.
1
3
2
C
A B
For illustrative purposes only.
Tray cannot be removed from
unit.
Loading ...
Loading ...
Loading ...