Loading ...
Loading ...
Loading ...
25
29. Check inner spacing
Open door and check that space between dishwasher
cabinet opening and tub is equal on both sides. If spacing is
not equal, loosen bracket screws and shift tub. Tighten
bracket screws.
Choose Anchor Attachment Method
IMPORTANT: The dishwasher must be secured to the cabinet as
one of the final steps. Prepare the dishwasher for this by attaching
the dishwasher to the cabinets using at least 4 of the 6 available
screw holes.
30. Cabinet Attachment:
B
A
B
A
A
B
A. #3.5 x 18 mm screws (4) for Cabinet mount
B. #2 Phillips screwdriver
Remove the short screws from the package and insert them
into four of the six mounting holes provided. Using a Phillips
head screw driver, screw them into the cabinet. If longer
screws are needed, the installer will need to provide.
Connect Water Line to House
Shutoff Valve
31. Attach water supply line
Attach the water supply line (flexible braided line) to the hot
water line using a connection configuration that is in
compliance with local codes and ordinances. The water
supply to the dishwasher should have a manual shutoff valve
located under the sink.
Connect Drain Hose
32. Connect drain hose
Connect drain hose to waste tee or waste disposer using one
of the following options:
� Option A: Waste disposer – no air gap
� Option B: No waste disposer – no air gap
� Option C: Waste disposer – with air gap
� Option D: No waste disposer – with air gap
IMPORTANT: The drain hose connection of the disposer or a
waste tee must be made before the drain trap and at least
20" (508 mm) above the floor where the dishwasher will be
installed.
Helpful Tip: To reduce vibration of the hose, keep the hose
away from the floor.
26-Jun-2023 08:47:55 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Loading ...
Loading ...
Loading ...