Loading ...
Loading ...
www.SereneLifeHome.com
A. Seat & lid.
B. Flush valve.
C. Flush water tank.
D. Toilet base
E. Flush piston pump: the toilet ushes when the piston pump is moved up and down
(water from the self-contained ush tank, capacity: 17L).
F. Removable waste water tank, capacity: 24L
G. Water inlet (can connect to a water supply system when available)
H. Manual ush button when the toilet is connected to water supply system.
I. Cap of ush water tank.
J. Rotating emptying spout: ensures that the waste tank can be easily and hygienically emptied.
K. Level indicator: when it turns red, the waste tank requires emptying.
L. Vent button: Always press the vent button to release air pressure inside the waste holding tank to avoid
waste spills before opening the ush valve. When emptying the waste tank, press the vent button to
prevent splashing.
INTRODUCTION
Cassette toilet is made up of two parts: a permanently toilet frame and a waste holding tank that is
removeable from the back side. The removable waste tank is located under the toilet and can be pulled
out for emptying and cleaning.
PREPARING FOR USE
1. Fill the ush tank with clean water or connect the water inlet at the rear of the toilet to a water supply
system. (Fig 1)
2. Press the vent button to release air pressure inside the waste holding tank to avoid waste spills before
opening the ush valve. (Fig 2)
3. Pull out the ush valve. Drop 1 toilet treatment pod & add 1 liter water into the waste holding tank
through the opening. (Fig 3)
•
Any brand of RV toilet treatment pod is working. It helps to break down waste, avoid unpleasant smells
in the waste tank and keeps the inside of the waste tank clean*
USE
1. Pull out the ush valve to use the toilet. (Fig 4)
2. After use, ush the toilet by moving the piston pump up and down or by pressing the orange ush
button for seconds when water supply is connected. (Fig 5)
3. Close the ush valve after ushing. (Fig 6)
EMPTYING
The waste holding tank must be emptied when the indicator turns red. It is advisable to empty the
waste holding tank earlier.
Note!
Do not allow the waste holding tank to become too full.
1. Make sure that the ush valve is closed. Pull the waste tank out from the toilet. (Fig 7)
2. Carry the holding tank to a normal toilet or to a legal waste disposal site.
3. Remove the emptying spout cap. Empty the waste. (Fig 8)
4. After emptying, ush the waste holding tank and clean the ush valve thoroughly with water.
Slide the waste tank back into the toilet. (Fig 9)
4
5
6
7 8 9
Loading ...