Loading ...
Loading ...
Loading ...
Connecting the SWA-8000S with Soundbar
c Before connecting to the Wireless Receiver Module, connect your subwoofer first.
c Use the speaker cable to connect the wireless receiver module to the speakers.
c Plug the Power cord into a power outlet. The LED turns on.
1. Check the Soundbar is in Power Off status, and press the
(Mute) button on your remote control for 5~6
seconds until the “ID SET” message appears on your Soundbar display.
2. Turn on your Soundbar when the link indicator (Blue LED) on the SWA-8000S flickers fast.
3. Turn on your Soundbar with the “power” button on your remote control and wait for a while. They are completely
connected to each other if you can see the LINK LED indicator is continuously lit (in Blue).
c If the Wireless Receiver Module is not linked to your Soundbar (displaying the LED indicator in Red), connect
them as follows.
1. Check the Soundbar is in Power Off status, and press the
(Mute) button on your remote control for 5~6
seconds until the “ID SET” message appears on your Soundbar display.
2. Press the ID SET button on the back of the Wireless Receiver Module with a sharp pin for 5~6 seconds until the
LINK LED indicator blinks (in Blue).
3. Turn on your Soundbar with the “power” button on your remote control and wait for a while. They are completely
connected to each other if you can see the LINK LED indicator is continuously lit (in Blue).
c Once connected, your Soundbar and the Wireless Receiver Module are automatically reconnected even after
you turned them off and then on.
Compatible Models
HW-K360 HW-K450 HW-K550 HW-J6000R
HW-K369 HW-K460 HW-K551 HW-J6001R
HW-K390 HW-K490 HW-K560 HW-J6010R
HW-KM36 HW-KM45 HW-K561 HW-J6011R
HW-KM36C HW-KM45C HW-K590 HW-J4000
HW-JM4000
HW-JM4000C
HW-J6090R
c The model list is subject to change without further notice.
SWA-8000S-ZA_0704.indd 5SWA-8000S-ZA_0704.indd 5 2016-07-04 3:34:032016-07-04 3:34:03
Loading ...
Loading ...