Loading ...
Loading ...
Loading ...
4 5085460New 5/11
1.
2.
3.
(Inset A)
Cam Gear
90˚
45˚
OPERATING INSTRUCTIONS
1. TO OPERATE: Plug cord into a
grounded 120V, 60 Hz outlet.
Select desired operating speed
with pull cord on the rear of the
motor:
First pull: High
Second pull: Medium
Third pull: Low
Fourth pull: OFF
NOTE: THIS FAN IS VERY
HEAVY.
Failure to securely hold onto
head assembly while adjusting
head angle could result in per-
sonal injury.
2. TO ADJUST HEAD ANGLE: While
holding head rmly, loosen knob
under motor (turn counter-
clockwise). Tilt head to desired
position FIRMLY retighten knob
under motor.
FOR OSCILLATING MODELS:
3. OSCILLATION: Push down oscil-
lation knob on motor housing to
make fan head move from side to
side.
NOTE FOR OSCILLATING MOD-
ELS: FAN IS SHIPPED WITH 90º
OSCILLATION ANGLE. FOR 45º
OSCILLATION ANGLE, CONNECT
THE OSCILLATION LINK TO THE
INNERMOST HOLE IN THE CAM
GEAR. (Inset A)
MAINTENANCE
WARNING: ALWAYS UNPLUG THE
CORD BEFORE MOVING OR
SERVICING.
WARNING: DO NOT IMMERSE FAN
IN WATER!
CLEANING: Use a soft cloth and
mild soap solution such as liquid
dish washing detergent. Dry all
parts completely before reconnect-
ing to power supply.
CLEANING: Use a soft cloth and
mild soap solution such as liquid
dish washing detergent. Dry all
parts completely before reconnect-
ing to power supply.
SERVICING: All other servicing, with
the exception of general user main-
tenance, should be performed by an
authorized service representative.
LUBRICATION: Precision motor
bearings are sealed at the factory
for life and do not require further
lubrication.
STORAGE: Store the Fan, with these
instructions, in a clean and dry
place.
PREVENTATIVE MAINTENANCE:
Occasionally check oscillation link
bolts (2) and tighten as necessary.
Operating Instructions & Parts Manual 99533/99532
Loading ...
Loading ...
Loading ...