Loading ...
Loading ...
Loading ...
Connections
Center speaker
/
/
<'
/
Powered
subwoofer
/
/
Surround left "'. -" Surround right
speaker "- -< speaker
• You can get better picture quality in the order Component
video > S-video > Composite video.
• Distortion of picture may occur when connecting to the TV via a
VCR, or to a TV with a built-in VCR.
• You need to set "MONITOR TYPE" in the PICTURE menu
correctly according to the aspect ratio of your TV. (-" pg. 39)
• To connect a TV equipped with the component video
input jacks
y_ COMPONENT, 1
Tecompenent e e e
video input
NOTE
• Although the satellite speakers and the powered subwoofcr are
magnetically shielded, the TV screen may appear mottled, llt this
case, keep enough distance between the speakers and the TV.
• The speakers are magnetically shielded to avoid color distortions on
TVs. However, if not installed properly, they may cause color
distortions. So, pay attention to the R)llowing when installing the
speakers.
- When placing the speakers near a TV set, turn off' the TV's main
power switch or unplug it beR)re installing the speakers. Then wait
at least 30 minutes belbre turning on the TV's main power switch
again.
Some TVs may still be aflected even though you have lollowed the
above, ll' this happens, move the speakers away l?'om the TV.
• Place the satellite speakers on a flat and level surface.
• Be sure to place the powered subwoofer to the TV's right. If you place
the powered subwoofer to the TV's lefl, keep sufficient distance
between them to prevent the TV screen from appearing mottled.
For TH-Md06/TH-Md03 only:
• Do not lean against the satellite speakers, as the speakers could fall
down or break, possibly causing injury. Especially be careful not to
let children lean against them.
Component video cord (not supplied)
NOTE
• If your TV supports progressive video input, you c'ml enjoy a high
quality picture by setting the progressive scan mode to active.
(. pg. 20)
• If the component video input jacks of your TV are of the BNC type,
use a plug adapter (not supplied) to convert the pin plugs to BNC
plugs.
• The component vide() signals can be output only when you select
"DVD" as the source to play. (. pg. 19)
• To connect a TV equipped with the composite or S-
video jacks
Center unit
Composite video cord
_,,,,,,, (supplied)
C_==, _ or
S-video cord 1
s-wr_o (not supplied)
Align the • marks.
To S-video input To composite
V video input
14
Loading ...
Loading ...
Loading ...