Loading ...
Loading ...
Loading ...
14 English
TROUBLESHOOTING
POSSIBLE CAUSE AND SOLUTIONPROBLEM
Unit is not plugged in. Plug Power Cord into electrical outlet.
Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.
Fuse needs to be replaced. See IMPORTANT INSTRUCTIONS for how to replace the fuse or contact
Consumer Service.
Ensure unit is set to highest setting for maximum air circulation.
Allow the unit to fully circulate the air throughout the room, this may take several minutes.
Ensure all air inlets and outlet grille are unobstructed.
Switch the direction of the airow from DIRECT to EXHAUST (or EXHAUST to DIRECT). If problem
persists, turn unit OFF and ON and adjust settings as needed.
Preset temperature in AUTO might be set too high. Lower the set temperature or turn AUTO off.
You might be connected to a 5 GHz WiFi network. Disconnect and reconnect to a 2.4 GHz network and try
the setup again.
Your WiFi signal might not be strong enough. Move closer to your WiFi router and try the setup again.
Unit fails to
power on.
Unit is not producing
sufcient amount of air.
Air is not moving in the
desired direction.
Unit is on but there is no air
moving.
Cannot Connect Unit to my
Amazon Alexa Account
Loading ...
Loading ...