Loading ...
Loading ...
Loading ...
24
CARING FOR FILTERS
Grease rail and Grease Filter Installation / Removal.
Remove the plastic from the lter, the knobs need to be installed onto the lter with 2
screws to each lter.
Install the grease rail into the back of the hood, into the slots on the inside oor of the rear of
the hood.
The Grease lters should be installed before operating the rangehood.
To install the lters, use the two knobs to hold the lter and insert the lter into the front edge of
the hood with the knobs facing out into the spring loaded slot.
Install the other end of the lter above the grease rail in the back of the hood.
1
CLEANING METAL GREASE FILTERS
The stainless steel grease lters and grease rail should be cleaned frequently in hot detergent solution or
washed in the dishwasher. Clean exterior surfaces with a commercially available stainless steel cleaner.
Abrasives and scouring agents can scratch stainless steel nishes and should not be used to clean
nished surfaces.
Make sure the grease lters are completely dry with no water present before re-installing into hood.
1
2
Loading ...
Loading ...
Loading ...