Loading ...
Loading ...
Loading ...
2. BASIC OPERATIONS
2.1. Working with Patterns
The DrumBrute Impact holds 64 patterns, arranged in four banks of 16 patterns each.
2.1.1. Select a bank
In addition to the numbers 1-4, the first four Step buttons are silkscreened with the letters A,
B, C, and D. Each one represents a bank of 16 patterns.
To switch between banks, press the Bank button and then select one of the first four Step
buttons. After this, press the Ptrn button and select one of the 16 patterns within that bank
using the Step buttons.
There is a setting in the MIDI Control Center software that allows you to switch between
banks while the DrumBrute Impact is playing, without the additional step of selecting a
pattern. See the Next Bank section [p.96] of the MIDI Control Center chapter [p.70] to learn
more about this feature.
2.1.2. Select a pattern
To select a pattern within the current bank simply press one of the Step buttons (1-16). If you
are still in Bank mode you will need to press the Ptrn button first and then select the pattern.
The DrumBrute Impact will respond in one of two ways if it is running when the selection
is made: it will either change immediately to the new pattern or wait until the end of the
current pattern.
There's a front-panel button combination that allows you to toggle between these two
settings: just hold the Shift button and press Step button 14. If that button is lit when you
press the Shift button, the At End setting is active.
You can also use the “Wait to Load Pattern” setting in the MIDI Control Center software to
specify which behavior you prefer. This is described here [p.95] in the MIDI Control Center
chapter [p.70].
♪: The pattern selection cannot be changed while recording.
Arturia - User Manual DrumBrute Impact - Basic Operations 20
Loading ...
Loading ...
Loading ...