Loading ...
Loading ...
Loading ...
English
Installation
English22
BC
4. If the washer is not level, turn the appropriate
leveling feet clockwise (B) to lower the washer, or
counterclockwise (C) to raise the washer so that it is
level.
5. Once you have the washer leveled, push down on all
4 corners to ensure that all 4 feet are touching the
floor. If the washer rocks when you push down on a
corner, adjust the leveling foot at that corner so the
foot is firmly on the floor.
NOTE
• You can also level the washer by lining a level up with
the seam that runs between the top of the washer
and the body of the washer and checking if the
washer is level on all 4 sides.
• See the diagram above, left. After you have checked
all 4 sides and leveled the washer, perform Step 5
above.
Leveling the washer with the leg ring
A
B
A. Water drip pan
B. Bulge height less than 5/8”
Untitled-1 22 2022-05-13 11:31:45
Loading ...
Loading ...
Loading ...