Loading ...
Loading ...
Loading ...
P-S500 Owner’s Manual
32
Connecting to other devices
By connecting a computer to the [USB TO HOST] terminal, you can transmit or receive data between the
instrument and the computer. For details on using a computer with this instrument, refer to the
“Computer-related Operations” on the website.
NOTICE
• Use an AB type USB cable of less than 3 meters. USB 3.0 cables cannot be used.
• If you are using a DAW (digital audio workstation) application with this instrument, set the Audio Loopback function (page 33)
to off. Otherwise, a loud sound may occur, depending on the settings of the computer or the application software.
NOTE
• When using a USB cable to connect the instrument to your computer, make the connection directly without passing through a USB hub.
• You cannot connect a computer to this instrument with a USB wireless LAN adaptor.
• The instrument will begin transmission a short time after the USB connection is made.
• For information on setting up your sequence software, refer to the owner’s manual of the relevant software.
• The instrument does not transmit any MIDI messages when connected with Smart Pianist.
• The [USB TO HOST] terminal and [iPad] terminal cannot be used at the same time for connecting a computer and a smart device.
Connecting to a computer – [USB TO HOST] terminal
Computer
USB cable
Instrument
Loading ...
Loading ...
Loading ...