Loading ...
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, basic safety
precautions should always be taken, including
the following:
READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY
FROM WATER
DANGER –
Any appliance is electrically
live even when the switch is off. To reduce the
risk of death or injury by electric shock:
1. Always unplug appliance immediately
after using.
2. Do not use while bathing or in the shower.
3. Do not place or store appliance where it can
fall or be pulled into a tub or sink.
4. Do not place in or drop into water or
other liquids.
5. If an appliance falls into water, unplug it
immediately. Do not reach into the water.
WARNING –
To reduce the risk of
burns, electrocution, fire, or injury to persons:
1. This appliance should never be left
unattended when plugged in.
2. This appliance should not be used by, on,
or near children or individuals with certain
disabilities.
3. Use this appliance only for its intended
use as described in this manual. Do not
use attachments not recommended by the
manufacturer.
4. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly, or if it has been dropped, damaged,
or dropped into water. Return the appliance
to a Conair Service Center for examination
and repair.
5. Keep the cord away from heated surfaces.
Do not pull, twist, or wrap line cord around
appliance, even during storage.
6. Never block the air openings of the appliance
or place it on a soft surface, such as a bed or
couch, where the air openings may be blocked.
Keep the air openings free of lint, hair, and
the like.
7. Never use while sleeping.
8. Never drop or insert any object into any
opening or hose.
9. Do not use outdoors or operate where aerosol
(spray) products are being used or where
oxygen is being administered.
10. Do not use an extension cord to operate hot
air styler.
11. Do not direct hot air toward eyes or other
heat-sensitive areas.
12. Attachments may be hot during use.
Allow them to cool before handling.
13. Do not place appliance on any surface while
it is operating.
14. While using the appliance, keep your hair
out of it. Keep your hair away from the air inlets.
15. Do not use with a voltage converter.
16. This appliance is not a toy. Keep away
from children.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This appliance is intended for household use
only. Use on Alternating Current (60 hertz) only.
Standard hot air stylers are designed to operate
at 110 to 125 volts AC.
This appliance has a polarized plug (one blade
is wider than the other). As a safety feature, this
plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety
feature.
NOTE: Do not use this styling appliance on
hair extensions.
CHECK ALCI SAFETY FEATURE EVERY TIME
YOU USE APPLIANCE
This appliance is equipped with an Appliance
Leakage Circuit Interrupter (ALCI), a safety
feature that renders it inoperable under some
abnormal conditions, such as immersion in
water. To make sure the ALCI is functioning
properly, perform the following test. The
purpose of this test is to allow you to make sure
the water sensing system (ALCI) is working.
1. Plug in the appliance
and press test button on
plug (see diagram).
2. The appliance will stop
working. There will be an
audible click and reset
button will pop out. This indicates the ALCI is
functioning properly.
3. To reset ALCI with a reset button, unplug unit.
Then push reset button in and reinsert plug into
outlet.
4. If ALCI is not functioning properly, return
appliance to service center.
5. It is important that if immersion occurs, this
unit be brought to a service center. Do not try
to reset.
6. Be sure to repeat test every time you use the
unit to confirm ALCI is operational.
Should the appliance go off and the reset
button pop up during use, this could indicate a
malfunction in the unit. Remove plug from outlet
and allow the appliance to cool. Reinsert plug
into outlet.
The appliance should then function normally.
If not, return it to an authorized Conair Service
Center for evaluation and repair.
IONIC TECHNOLOGY
Many aspects of modern living, including
air-conditioning, contact with man-made fibers
and air pollution contribute to a buildup of static
electricity in the hair. Even brushing and towel-
drying the hair can increase these levels, causing
the surface of the cuticle to become rough.
Consequently, hair may have a dull appearance.
Also, high levels of static charge cause hair to
become flyaway and difficult to style.
The ion generator produces a stream of nega-
tive ions that act to neutralize the static charge,
smoothing the scales on the cuticle for shiny,
smooth and manageable hair, so you can achieve
your desired style easily.
THE IONIZING FUNCTION
Generates negative ions to:
• neutralize the generally positive charge on
flyaway, frizzy hair
• eliminate static electricity
• contribute to shine
NOTE: The unit may produce a clicking
sound at times, which is normal for a
high output ion generator.
GETTING STARTED
After shampooing your hair, towel-dry and use
the dryer handle without the attachment to
remove excess moisture from hair. Use a large-
toothed comb to carefully untangle hair. Always
start untangling your wet hair at the tips, then
gradually work your way up to the scalp. Gentle
untangling prevents split ends from forming.
You may now finish drying and styling your
hair using your hot air styler. Make sure your
attachment is locked into place. Plug styler into
outlet. Slide switch to turn appliance on and off.
TO STYLE HAIR
1. After detangling hair, section damp hair into
4 to 8 equal parts, depending on hair type.
2. Select heat setting based on hair type and
desired effect.
3. Place the paddle brush attachment into
the hair, close to the roots, and brush through
the section.
4. For added root lift and volume: Place the
brush underneath the hair section close to the
roots with the bristles pointing upward. Use your
other hand to pull the hair section taut against
the silicone paddle until the bristles penetrate
through the hair.
5. FOR MORE VOLUME: Turn your head upside
down while you brush/dry.
Reset
Test
GET TO KNOW YOUR STYLER
1000W
Single
voltage
Release/lock
attachment buttons
3 temperature settings
plus cool shot
FEATURES
• 1000W
• High-shine, ionic conditioning
• Cushioned paddle with heat-activated
silicone for added shine
• 3 heat settings, plus cool shot
• Professional power cord
DRYER HANDLE
Use handle without attachment to remove
excess moisture from hair before styling.
PADDLE BRUSH
136 Flexalite™ bristles. Just the right number,
spaced just the right way. Epoxy tips gently
massage scalp for painless detangling.
HEAT/SPEED SETTINGS
Cool Setting: This position combines ideal
airflow and temperature setting for shaping
finer, damaged or treated hair.
Low Setting: Ideal airflow for medium, normal
hair.
High Setting: Combines ideal airflow with
higher temperature for thick hair.
Cool Shot: Using the cool shot setting at the end
sets the style for a long-lasting effect.
SETTING HAIR TYPE
COOL Fragile, Fine/Thin Hair
LOW Medium/Normal Hair
HIGH Wavy/Curly/Coarse
Thick Hair
COOL SHOT Sets Style
Loading ...
Loading ...
Loading ...