Loading ...
Loading ...
Loading ...
ww_.GEAppliances.com
Press down andpull out.
RemovableOvenFloor
Toremovetheovenfloor.
[] Remove the oven door using the
instructions in tim lJ#-OffOven Door
section.
[] Press down and pull out tim
remo'_able oven floor.
[7_ Clean the oven floor witb warm
soapy watel:
[] When reins'tailing the oven floor, be
sure to slide it all the way to tbe back
of tim oven.
IMPORTANT"Mways replace tbe
removable floor before tbe next use.
Oven Racks and Convection Roasting Rack
Clean the oven racks and the convection
roasting rack witb an abrasive cleanser or
steel wool. After cleaning, rinse tbe racks
with clean water and dry witb a clean
clotb.
NOTE:Theovenracksand convectionroasting
rackmaybecleanedin theself-cleaningoven.
However,theovenrackswill darkenin color,
losetheirlusterandbecomebardtoslideff
cleanedduringtheself-cleaningcycle.
To make the oven racks slide more easily,
apply a small amount of cooking oil to a
paper towel and wipe tim edges of tim
oven racks witb tim paper towel.
Oven Light Bulbs (onsomemodels)
NOTE: Theglass cover should be
removed only when cold. Wearing latex
gloves may offer a better grip.
CAUTION..Before replacing your
oven light bulb, disconnect the electrical
power to the oven atthe main fuse or
circuit breaker panel.
Be sure to let tim light cover and bulb
cool completely.
For your safety, do not touch a hot bulb
witb bare hands or a damp cloth.
Toremove:
[] Turn tim glass cover
counterclockwise 1/4 turn until tbe
'tabs of tbe glass cover clear tbe
grooves of the socket.
[] Using gloves or a dry dotb, remove
tbe bulb by pulling it straight out.
Toreplace:
[] Use a new lg0-volt balogen bulb,
not to exceed 50 watts.
[] Using gloves or a dry clotb, remove
tim bulb from its packaging. Do not
touch tim bulb with bare fingers.
[] Push tim bulb straight into tim
receptacle all tim way.
[] Place tim tabs of tim glass cover into
tim grooves oftbe socket. Turn dm
glass cover clockwise 1/4 turn.
For improved lighting inside tbe
oven, clean the glass cover
frequently using a wet dotb. This
should be done when tbe oven is
completely cool.
[] Reconnect electrical power to
tbe oven.
31
Loading ...
Loading ...
Loading ...