Loading ...
Loading ...
Loading ...
6
ENG
To start cooking
1. Touch the ON/OFF control for
3 seconds.
After power on, the buzzer
beeps once, all displays show “
– “, indicating that the induction
hob has entered the state of
standby mode.
2. Place a suitable pan on the
cooking zone that you wish
to use.
Make sure the bottom of
the pan and the surface
Of the cooking zone are
clean and dry.
3. According to the heating zone where the pan
is placed, select a relevant zone select key by
pressing “
” key (A). The symbol 0. selected will
stay fully it.
4. Adjust heat setting by touching the slider
regulating key (D) control
Power
down
Power up
• If you don’t choose a heat setting within 1
minute, the induction hob will automatically
switch off. You will need to start again at step 1.
• You can modify the heat setting at any time
during cooking.
If the display flashes
alternately with the heat
setting
This means that:
• You have not placed a pan on the correct cooking
zone or,
• The pan you’re using is not suitable for induction
cooking or,
• The pan is too small or not properly centred on the
cooking zone.
No heating takes place unless there is a suitable pan on
the cooking zone. The display will automatically turn off
after 1 minutes if no suitable pan is placed on it
When you have finished
cooking
1. Touching the relevant zone select key(A) that you
wish to switch off.
2. Press the “-”key will decrease the power to “0”
level, or press the "+" and "-" at the same time, the
power level will decrease to 0 straight away.
3. Beware of hot surfaces
“H” will show which cooking zone is hot to touch. It
will disappear when the surface has cooled down
to a safe temperature. It can also be used as an
energy saving function if you want to heat further
pans, use the hotplate that is still hot.
Using the Boost function
Actived the boost function
1. Select the heating zone by touching the zone
select key (A).
2. Touching the boost control key (E)
, the zone
indicator show “P.” and the power reach Max.
Cancel the Boost function
1. Touching the relevant zone select key(A) that you
wish to cancel.
2. Touching the slider regulating key (D) to cancel
the Boost function, then the cooking zone will
revert to level 9.
• The function can work in any cooking zone.
• The cooking zone returns to level 9 after 5
minutes.
Using Child Lock Function
• You can lock the controls to prevent unintended
use (for example children accidentally turning the
cooking zones on).
• When the controls are locked, all the controls except
the OFF control are disabled.
To lock the controls
Touch the keylock control for 3 seconds. The timer
indicator will show “Lo “
To unlock the controls
1. Make sure the Induction hob is turned on.
2. Touch and hold the keylock control for a while
3. You can now start using your Induction hob.
When the hob is in the lock mode, all the
controls are disable except OFF, you can always
turn the hob off with the OFF control in an
emergency, but you shall unlock the hob first in
the next operation.
Over-Temperature Protection
A temperature sensor equipped can monitor the
temperature inside the Induction hob. When an
excessive temperature is monitored, the Induction
hob will stop operation automatically.
USING YOUR INDUCTION HOB
Loading ...
Loading ...
Loading ...