Loading ...
Loading ...
Loading ...
Don't forget to register for your 12 month guarantee at www.vytronix.com
using product code brandnew-vytronix-pet01
HOW TO CLEAN THE DUST CONTAINER
1. Release the filter lock and take out the motor filter.
2. Take out the plastic dust filter.
3. Use a soft brush to clean the plastic dust filter then rinse it with clean water, dry it thoroughly before placing
it back.
CLEANING THE EXHAUST AIR FILTER
The exhaust air filter cleans the air a final time before it leaves
the vacuum cleaner. You can clean the exhaust air filter as follows:
1. Switch off the vacuum cleaner and disconnect the plug from the
mains. To do this always pull on the plug and not on the cable.
2. Open the exhaust filter cover.
3. Brush or tap the HEPA filter over a bin.
4. Put the exhaust air filter back into place.
5. Close the exhaust filter cover.
IMPORTANT! If any of the filters are heavily soiled they ( especially the black foam filter ) they
can be rinsed in water but if you do this you must allow them to dry for 24 hours before reusing
the cleaner.
PLEASE NOTE
All the above instructions are very important if you are experiencing
a lack of suction or poor pick up when using you vacuum cleaner.
These symptoms are a clear indication that your filter system
requires cleaning, if you follow the simple steps above you will
maintain a constant strong suction/pickup.
IMPORTANT – never use your vacuum cleaner without the filters
fitted.
6
Loading ...