Loading ...
Loading ...
Loading ...
PREPARING THE VACUUM CLEANER
1. Fit the hose on the vacuum cleaner by inserting the rotating hose
connection into the vacuum cleaner until you hear a click. To remove
the hose, press the buttons at the side of the hose connection and
pull it out.
2. Assembling the telescopic extension tube and accessories
2.1: Fit the extension tube onto the other end of the hose.
2.2: Fit the floor brush onto the extension tube.
Floor Nozzle
The floor nozzle has two settings. When cleaning
hard surfaces (parquet flooring, flooring tiles, etc.),
the nozzle brushes should be extended. When cleaning
carpets and mats, the brushes should be retracted into
the nozzle. Press the brush change button to switch between
the two settings.
Crevice nozzle/dusting brush
For radiators, corners, skirting, etc.
Upholstery nozzle
For furniture, curtains, drapes, etc.
IMPORTANT INFORMATION
This Vacuum Cleaner is fitted with an internal safety thermal cut out.
The Vacuum Cleaner will switch off automatically when it overheats.
The Vacuum Cleaner may overheat if the filters are clogged, the hose is blocked or the dust tank is full.
If the Vacuum Cleaner cuts out, empty the dust tank, remove any blockages and clean the filter out before using again.
The Vacuum Cleaner will need 30-60 minutes to cool down.
TRANSPORT AND STORAGE
1. You can lift and carry the vacuum cleaner using the carrying handle. Never pull or lift the vacuum cleaner by the cord.
2. Before putting the vacuum away, switch off the socket, unplug, and press the cord rewind button until the cord is fully
rewound.
3. To save space, the vacuum can be stored upright on its end cover. The telescopic tube can be hung on the vacuum cleaner
by inserting the parking fixture into the vertical parking holder.
Don't forget to register for your 12 month guarantee at www.vytronix.com
using product code brandnew-vytronix-pet01
4
Loading ...
Loading ...
Loading ...