Loading ...
Loading ...
15
MODES SELECTION
To select the desired operating
mode, touch repeatedly the MODE
key (C2) until the desired function
is selected.
AIR CONDITIONING MODE
This is ideal for hot and humid weath-
er when the room needs to be both
cooled and dehumidied.
To correctly set this mode:
• Touch repeatedly the MODE key
(C2) until the air conditioning
symbol appears. The display will
show the desired temperature and
the AUTO fan speed.
• To change the tempera-
ture to be reached, touch
the (C4) or (C3) key.
Please note: The most suitable temperatures, during the sum-
mer range from 24 to 27°C. However, setting the temperature
signicantly lower than the outdoor temperature is not recom-
mended.
In conditioning mode, the air ow can be selected only from the
remote control.
DEHUMIDIFYING MODE
This is ideal for reducing humidity in
the room (spring and autumn, damp
rooms, rainy periods, etc). For this
type of use, the appliance must be
set up as for air conditioning mode.
That is, the air exhaust hose (B2)
must be tted to the appliance to allow the humidity to be dis-
charged outside.
To correctly set this mode:
• Touch repeatedly the MODE key (C2) until the dehumidify-
ing symbol appears.
• The appliance automatically chooses the best air ow.
FAN MODE
When using this mode, the air ex-
haust hose (B2) does not need to be
attached to the appliance.
To correctly set this mode:
• Touch repeatedly the MODE key until the fan symbol
appears.
• Select the desired air ow by touching the increase (C4)
or decrease (C3) key.
The air ows available are:
Minimum air ow: when most silent operation is
desired.
Medium air ow: when the noise level needs to
be low but with a good comfort level.
Maximum air ow: for maximum performance.
SELECT THE TEMPERATURE SCALE
The temperature can be displayed
in °C or °F. To change the temper-
ature unit of measure touch both
the increase (C4) or decrease
C3) keys for about 10 sec.
OPERATING FROM THE CST (Cool Surround Tec-
nology) REMOTE CONTROL
The CST remote controller is based on Bluetooth® Low Energy
communication with the Pinguino.
INSERTING OR REPLACING THE BATTERIES
• Remove the cover on the rear of the remote control.
• Insert or replace the batteries with two new LR6 “AA” 1.5V
batteries, inserting them correctly (see the instructions in-
side the battery compartment) (g. 10).
• Replace the cover.
If the remote control unit is replaced or discarded, the bat-
teries must be removed and disposed of in accordance with
current legislation as they are harmful to the environment.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries. Do not dispose of batteries in
re. Batteries may explode or leak. If the remote control is
not be used for a certain length of time, remove the batter-
ies. Use only battery within the expired date.
DESCRIPTION OF THE CST REMOTE CONTROL
D1
D10
D5
D3D2D9
D8
D4D6 D7
Loading ...
Loading ...
Loading ...