Loading ...
14
ø 150mm
in the
window
panel
in the wooden
kickboard of a
French window
in the wall: you are
recommended to in-
sulate the section of
wall using suitable
insulation.
• Fit the wall ange (B1) into the hole.
• Fit the air exahaust hose (B2) into the wall ange (B1) (Fig.
9)
• When the hose (B2) is not connected, the drilled hole can
be closed with the ange cap (B1).
Please note: As special tools are required for installation, we
suggest you have the appliance installed by specialized person-
nel.
• When installing the air conditioner, you should leave a door
slightly open little as 1 cm to guarantee correct ventilation
and room pressure.
• Keep the air hose as short and free of curves as possible to
avoid constrictions.
OPERATING FROM THE CONTROL PANEL
C1C2
C4
C11
C13
C12
C9
C7
C5
C6
C3
C16
C14
C10
C15
C17
C8
DESCRIPTION OF THE CONTROL PANEL (C)
C1 ON/STAND-BY (on/o) key
C2 Function selection key MODE (air conditioning, dehumidi-
fying, fan)
C3 Decrease key
C4 Increase key
C5 Temperature indicator
C6 Timer indicator
C7 Timer symbol
C8 Air conditioning symbol
C9 Dehumidifying symbol
C10 Fan symbol
C11 ECO REAL FEEL indicator
C12 SILENT symbol
C13 Auto indicator
C14 Air ow indicators
C15 Alarm symbol
C16 ECO REAL FEEL symbol
C17 Set temperature values, programmed on/o time
TURNING THE APPLIANCE ON/OFF
Before plugging the appliance check
the cap on back of the unit is correct-
ly inserted on drainage hose (A10).
Insert the plug in the socket.
Two dashes appear on the display
indicating that the appliance is in
stand-by.
Touch the
C1C2
C4
C11
C13
C12
C9
C7
C5
C6
C3
C16
C14
C10
C15
C17
C8
(C1) key to turn on the
appliance.
When the appliance comes on, the
last function set before it was shut
o is activated.
Please note: After few seconds
of the control panel inactivity, its
brightness will be automatically re-
duced and in the next few minutes
it will be further reduced.
To turn the appliance o, touch the
C1C2
C4
C11
C13
C12
C9
C7
C5
C6
C3
C16
C14
C10
C15
C17
C8
(C1) key again.
Please note: Never turn o the air conditioner by simply pull-
ing the plug. Touch the
C1C2
C4
C11
C13
C12
C9
C7
C5
C6
C3
C16
C14
C10
C15
C17
C8
(C1) key in order to put your air
conditioner in stand-by and wait a few minutes before pulling
the plug. In this way, the appliance can perform the operating
status checks.
Loading ...
Loading ...
Loading ...