Loading ...
Loading ...
Loading ...
Using the Timer
1. Enter the Timer Mode.
l
Navigating Between Modes
Seconds
Hour, minute
2. Use the operations below to perform a
timer operation.
D
D
D
(Time up)
Resume
Pause
(Measurement operation starts.)
Start
●
A beeper will sound for 10 seconds to
let you know when the end of a
countdown is reached.
●
You can reset a paused countdown to
its start time, by pressing (B).
3. Press any button to stop the tone.
Hand Alignment
Adjustment
Strong magnetism or impact can cause the
time indicated by the analog hands to become
different from the time on the digital display. If
this happens, adjust hand alignment.
Adjusting Hand Alignment
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least five seconds.
Release the button when [SUB] starts to
flash.
This enables adjustment of mode hand
alignment.
After five secondsAfter 3.5 seconds
Mode hand
3. If the mode hand is not aligned with 6
o’clock, use (B) and (D) to align it.
●
Holding down (B) or (D) scrolls through
settings at high speed.
4. Press (C).
This enables adjustment of the hour and
minute hands.
Minute handHour hand
5. If the hour and minute hands are not at 12
o’clock, use (B) and (D) to align them.
6. Press (A) to complete the setting
operation.
Other Settings
This section explains other watch settings you
can configure.
Enabling the Button
Operation Tone
Use the procedure below to enable or disable
the tone that sounds when you press a button.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
●
This is the setting mode. The hands
automatically shift out of the way for
easy viewing of the display and other
indicators.
Home City
3. Press (C) nine times.
This causes [KEY♪] or [MUTE] to flash on
the display.
4. Use (B) and (D) to select [KEY♪] or
[MUTE].
[KEY♪]: Operation tone enabled.
[MUTE]: Operation tone muted.
Watch Operation Guide 5674
14
Loading ...
Loading ...
Loading ...