Klein 60502 INSTRUCTION MANUAL

Loading ...

OPERATING INSTRUCTIONS

IDENTIFYING SINGLE CONDUCTOR (SORTING BUNDLED WIRES)

1. Attach the red Blade Prong

to the red test lead

and connect

to the known end of the wire to be traced.

2. Connect the black test lead

to a remote ground using the

Ground Prong

or black alligator clip

(see Remote Ground

connection method section), then power on the Transmitter.

3. Power on the Receiver, and use the Increase Sensitivity

and

Decrease Sensitivity

buttons to set the Sensitivity Level to 1-3.

4. Go to the other end of the cable, and one by one, pull each wire

away from the others, and touch the tip of the Receiver to the

wire. Ensure the wire is held in the proper orientation in relation

to the tip of the Receiver.

NOTE: If the signal strength displays “99”, the signal is saturated.

Use the Decrease Sensitivity button

to reduce the sensitivity level.

NOTE: If the signal strength is too weak, use the Remote Ground

connection method (if not done already) to strengthen the signal.

5. If multiple wires have the same sensitivity reading, pull back the

wires to separate them more if possible.

6. The highest signal value indicates the correct wire.

Loading ...

Klein 60502 Hard Hat Earmuffs, Full Brim Style