Loading ...
Loading ...
Loading ...
2
Cautions
Don t install the washing machine in bathroom or damp
places,. Do not wash the machine with water, do not put
wet clothes on the control panel film.
。
Do not use water hotter than 122 F .
If the machine is situated on a carpeted floor, please adjust
the feet in order to allow air to circulate freely.
Do not wash raincoat, bike cover, feather dress and such
waterproof laundries, which will make the washing machine
abnormal vibrations during spinning.
Do not share the same socket with other electric appliances.
Do not use the damaged plug or loose socket.
Please insert the plug into the power socket with rated voltage
110V A/C.
Always unplug the appliance and turn off the water when
the power is cut, moving or cleaning the washing machine,
or it is not in use. Do not insert or pull off the plug with wet hand.
Do not make the electric cable bended, stretched, twisted, strapped or changed,
pressed or nipped. If the electric cable or plug is damaged or the socket becomes
loose, they must be repaired or changed by our appointed repair stations or the
professionals of our post-sale service department to avoid danger. The pin of the
plug must remain clean. Please clean it carefully with dry cloth if it is dirty.
Ventilation holes
at the bottom
Soft item
Earth
wire
15
E1
E3
E2
F1
E4
E0
Display
Explanation
Settlement
The top lid is opened
when preset is started
Close the top lid and clear up the alarm
After draining 5 minutes,
it still does not reach to
water level
Open top lid, according to before
troubleshooting and settlement to
settle it ,then close the top lid and
clear up the alarm.
The top lid is open when
spinning
Spin does not balance
Open the top lid ,make the laundries
place equally, then close it and clear
up the alarm
After inlet 50 minutes still
not reach to setting water
level
Open top lid, according to before
troubleshooting and settlement to settle
it. Then close the tip lid and clear up the
alarm
Water level sensor is
wrong
Cut the power supply and call the
technicians
Close the top lid and clear up the alarm
Drain the water until the water level reach the
highest water level.
The water level is more than
overflowing water level.
E6
E7
The input and output of the
memory is abnormal.
Close the top lid and clear up the alarm
Other functions
1. Give an alarm
(1)If do not press START/PAUSE in 10 minutes after pressing POWER, power supply will cut
off automatically.
(2)Washing finished, power supply will cut off automatically .
vibration testing system will supervise the running. Once vibration is beyond certain
3. Power supply is cut off automatically
violent vibration. This machine has imbalance adjustment function, and the
During spinning, if the laundries are not placed equally in the tub, it would cause
2. Imbalance adjustment
level, the adjustment system will start automatically to adjust the imbalance.
Loading ...
Loading ...
Loading ...