Loading ...
Loading ...
Loading ...
How to Use the Self Cleaning Feature
1. Before self cleaning the oven, remove the racks, the
convection filter, all cookware (pots, pans, forks, etc.),
the meat probe, foil and any other loose objects from
the oven chamber. See page 27 for instructions on
how to remove and clean the filter.
2. Clean soil from the porcelain surfaces of the door
outside of the door gasket. Rinse surfaces well with
a solution of vinegar and water, then wipe dry. Heav-
ily soiled areas may be cleaned with a non-scratching
scouring pad.
3. Clean the door gasket by dabbing it with a solution of
water and mild soap.
WARNING
Your Oven's Self Clean Feature
About the Self Clean Cycle
• The oven will run better and produce better baked
goods when it is clean. During self cleaning, the oven
is heated to very high temperatures which burn off
any deposits on the surfaces of the oven. Self cleaning
eliminates the need for manual scrubbing of interior
surfaces. The self clean process takes about three
hours.
Tt is normal for the oven to emit smoke during the
first few self clean cycles. Tt is also normal for the
oven to emit popping sounds during self cleaning.
These sounds are caused by the expansion and con-
traction of metal surfaces when the oven heats up and
cools down.
• The self clean process takes about three hours.
• Self clean mode will not function if the meat probe is
connected.
WARNING
4. Turn on kitchen fans or vents to help remove odors
during the self clean cycle.
5. Make sure the oven door is shut.
6. Press the SELF CLEAN key, then press START.
The control panel automatically locks the oven door
during self cleaning. The latch prevents the door from
being opened since the high interior oven temperatures
can easily cause injury. Tf the door is not shut, an error
message will appear on the display. To correct the prob-
lem, press CANCEL. SECURE and wait approximately one
minute, then close the door. When the door is properly
closed, start the self clean process again.
The display shows the self clean cycle status:
• The clean symbol indicates that self clean is in _le_
process.
• The lock symbol indicates that the door is
latched.
• "ON" indicates that the heating elements are on.
Tf you want to stop the self clean cycle, press the CANCEL
• SECURE key. The oven door will remain locked until it is
safe enough to open. The lock symbol will disappear from
the display when the door lock is released. You will still
need to exercise caution when the door lock is released
because the inside of the oven may still be hot.
After the self clean cycle is complete:
• The door latch will release when the inside has cooled
down. The clean icon, lock icon and "ON" will disap-
pear from the display. Exercise caution because the
oven will still be hot (about 400°F) at the time the
door lock is released.
Reinstall the convection filter and oven racks before
using your oven.
You may notice a powder ash residue in the bottom
of the oven after self cleaning. This is normal. Use a
damp cloth or sponge to wipe up the residue after the
oven cools down. Continued...
23
Loading ...
Loading ...
Loading ...