Loading ...
Loading ...
Loading ...
8 — English
OPERATION
Wide Path Nozzle:
NOTE: The wide path nozzle has two inserts that can be
changed for desired use.
To change the insert, pull the tab to release and remove.
Align the new insert and press the tab until it clicks.
To clean with the wide path nozzle:
Using the wide path nozzle, scrub and break up stubborn
stains.
NOTE: Scrub back and forth while applying downward
pressure.
Hold the wide path nozzle at an angle and suction away
debris and moisture.
Continue applying solution, scrubbing, and suctioning
until the stains or spots are removed.
NOTE: Always hold the wide path nozzle at an angle when
suctioning. Suctioning power decreases when the wide
path nozzle is horizontal to the cleaning surface.
NOTE: If the motor begins to whine or if suction decreases
during use, turn the spot cleaner off and empty the re-
covery tank as described later in Maintenance.
When cleaning is complete, press the ON/OFF button to
stop the spot cleaner.
Remove the battery pack and remove the spot cleaner
from the cleaned area.
Empty and clean the recovery tank as described later in
Maintenance.
Allow the area to dry.
NOTICE:
Keep bystanders, children, and pets away from the
cleaned area until it is completely dry. If additional clean-
ing is required, wait until the area is completely dry before
using the appliance again.
REMOVING/EMPTYING/REATTACHING THE
RECOVERY TANK
See Figures 10 - 11, page 11.
Remove and clean the recovery tank after every use.
NOTE: The recovery tank is bottom rack dishwasher safe up
to 140°F. Use the low-heat setting for best results.
To remove:
Remove the battery pack.
Place the unit on a level surface.
Slide the tank release lever on the recovery tank. While
holding the lever use the handle on the tank to pull away
to release.
To empty:
Place the recovery tank on a level surface. Use the tabs
to remove the lid of the tank.
Move the recovery tank over a suitable container or drain.
Empty the contents and rinse the tank.
Replace the lid and secure.
To reattach:
Reinstall the tank by inserting and rocking it into the unit
until it is in place. The tank release lever will click to lock
securely.
Loading ...
Loading ...
Loading ...