Loading ...
Loading ...
Loading ...
3
PC[1]8140E PASTA COOKER (10.5 kW).
PC[1]8140E-7 PASTA COOKER (7.0 kW).
NOTE:
[1]: - Model Options;
- - Standard.
L - Low Back.
B - Bold Front.
LB - Low Back & Bold Front.
A commercial heavy duty, electric, high performance Pasta Cooker designed for cooking in a commercial
high production output site. The boiling medium is contained within a heavy gauge stainless steel tank,
heated by a 3 coil heavy duty element within the tank.
This Pasta Cooker features an Over Temperature Safety Cut Out System.
An open tank design and pivoting element system to make cleaning a simple and easy task.
This appliance can be fitted with the following optional accessories, (refer to the 'Replacement Parts List'
for details).
Plinth Kit.
Basket 1/4, 165 x 165mm.
Basket 1/4, 165 x 165mm.
Basket 1/2, 320 x 165mm.
Electrical supply connection point is located 56mm from the right hand side, 529mm from the rear of the
appliance and 489mm from the floor.
When connecting this electric appliance to the mains supply, ensure the following is carried out:-
n
isolating switch accessible during manual operation of the appliance.
The supply cord shall be protected against any mechanical or thermal damage.
Refer to the appropriate wiring standards for the size of cable that is to be supplied to an appliance for the
current drawn on that line.
A cold water supply must be connected to the water inlet connection (R
1
/
2
" BSP), located 49mm from the
LH side, 556 mm from rear and 139 mm from the floor. This should be plumbed in, in accordance with
National / Local Codes covering installation.
Maximum Water Supply Pressure 550 kPa (80 psi).
Tank Capacity - 40 ltrs of water.
THIS APPLIANCE MUST BE EARTHED. IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY A SUITABLY
QUALIFIED PERSON IN ORDER TO AVOID A HAZARD.
PC8140E 10.5 kW 3P+N+E, L1=L2=L3 = 15A @ 240V 1P+N+E, 44A @ 240V
PC8140E-7 7.0 kW 1P+N+E, 30A @ 240V 3P+N+E, L1=L2=L3 = 10A @ 240V
Loading ...
Loading ...
Loading ...