Loading ...
Loading ...
Loading ...
4
SETUP & OPERATION
STEP 3: UNLOCK AND OPEN THE SAFE
This safe is equipped with a dual digital/key lock system that requires
entering an active user code to unlock it and an entry key to open. It allows
for two separate reprogrammable active user codes.
The preset factory user codes are “1 2 3 4” and “1 2 3 4 5 6”.
1. Begin by inserting the entry key into the
cylindrical key hole on the left side of the
control panel.
1.
2. Turn the key to the left (counter clockwise)
as far as it will go.
2.
3. On the keypad enter the “#” key, then the
user code “1 2 3 4”, followed by “#” key
again.
3.
4. If correct code is entered, OPEN will
appear on the LCD panel, and you’ll hear a
chime tone indicating the safe is unlocked.
4.
5. Within 5 seconds, turn the handle upwards
to the right (clockwise) and pull the door
open.
5.
TO LOCK THE SAFE:
Carefully close the door, turn the key
clockwise to the right and remove.
The safe is now locked and an active user
code will need to be re-entered to open.
Loading ...
Loading ...
Loading ...