Loading ...
Loading ...
Loading ...
• Press the Power Button again to switch from Fan Only mode to Low Heat mode.
• You will hear a beep, and 1 High/Low Heat mode bar will illuminate on the control panel.
• Press the Power Button again to switch from Low Heat mode to High Heat mode.
• You will hear a beep, and 2 High/Low Heat mode bars will illuminate on the control panel.
• If you press the Power Button a fourth time, you will hear a beep, and the louvre will operate
automatically.
• Pressing the Power Button again will turn the appliance OFF.
NOTE: The appliance will continue to operate for an additional 30 seconds in the Fan mode after
the unit has been switched off. This is normal. This will help cool the internal components down
and prolong the life of the unit.
To switch between the operating modes press the MODE button.
Temperature range: 5 to 35 degrees.
Press the ‘˄’ button to increase the temperature.
Press the ‘˅’ button to decrease the temperature.
TIMER
Press the TIMER button to use timer function.
Press the “˄” button to increase the length of time before the unit switches off.
Press the “˅” button to decrease the length of time before the unit switches off.
Timer range: 1 to 24 hours in 1 hour increments.
After the desired set time has displayed on the control panel, the set time will flash before the
control panel goes back to display the current room temperature. The Timer icon will remain
displayed on the control panel.
To switch the Timer off, press the TIMER button again.
Press the POWER button to turn the device OFF.
NOTE: If the device is operating, pressing the POWER button for the first time activates the
louvres’ vertical movement mode, pressing it for the second time turns this mode off, and
pressing the button for the third time turns the appliance off.
Operating Your Heater
Loading ...
Loading ...
Loading ...