Loading ...
Loading ...
Loading ...
8
CARE & MAINTENANCE
STORAGE
If you store your Air Purifier for more than 30 days, you should:
1. Remove the pre-filter, HEPA filter and VOC filter from the unit.
2. Discard the pre-filter.
3. Wrap the HEPA filter in an air-tight plastic bag or plastic wrap.
Be sure that the filter is totally sealed to protect it from its storage
environment. Repeat steps for VOC filter.
4. DO NOT put the plastic-wrapped HEPA filter back into the Air Purifier;
remove plastic wrap completely before re-i
nstalling.
Same applies for VOC filter.
To set up the Air Purifier after storage:
1. Unwrap the HEPA filter and VOC filter completely.
2. Install a new pre-filter.
3. Install filter assembly in the Air Purifier.
See “Filter Replacement” section for proper installation.
WARNING: To avoid serious injury from electrical shock, ALWAYS turn the Air
Purifier OFF and unplug BEFORE cleaning.
1. Turn the Air Purifier OFF and unplug from power outlet.
2. Clean exterior surfaces with a damp soft cloth only. DO NOT pour or
splash water on the unit. Do not use any abrasive-type cleaner on it.
Wipe all surfaces free from dust and grime, especially the grill intake
and exhaust openings. Remove front cover to improve access to
cleaning intake openings. See front cover removal instructions in FILTER
REPLACEMENT section.
3. Once all surfaces are completely dry, plug unit back into power outlet
for operation.
CLEANING
4. With a dry soft cloth, wipe visible dust from exposed fan housing
chamber.
5. Install a new VOC Filter with its tabs facing the HEPA filter.
6. Install a new HEPA filter with its Pre-Filter Locking Tabs facing up
as shown.
7. Install a new Pre-Filter by securing it onto the Pre-Filter Locking Tabs.
NOTE: Do not try to wash and reuse either a HEPA, VOC or Pre-Filter.
8. To reinstall front cover, insert tabs on bottom into slots at base of unit.
Rotate front cover up and gently press top corners down until cover
snaps securely in place.
Loading ...
Loading ...
Loading ...