Loading ...
Loading ...
Loading ...
6
OPERATING INSTRUCTIONS
7. Use the FILTER CHANGE INDICATOR RESET button to reset the HEPA
Filter & VOC Filter or Pre-Filter Change Indicators. Each Indicator will
illuminate when each of the filters may need to be replaced. To reset,
press and hold the FILTER CHANGE INDICATOR RESET button until the
Change Indicator Light no longer appears on the front cover. If both
Lights are on at the same time, and only one of the filters is changed,
pressing the FILTER CHANGE INDICATOR RESET button will turn off
and reset both Indicator Lights.
NOTE: When both Indicators illuminate, replace the HEPA Filter
& VOC Filter and Pre-Filter at the same time.
8. Choose to activate or deactivate the Ionizer. The Ionizer provides
additional air freshness through the release of negative ions. To
activate, press the IONIZER button. To deactivate, press the
IONIZER button again and the light no longer appears.
9. To adjust the brightness of the LED indicators, press the LED DISPLAY
button. This activates dimming mode, which reduces the illumination
of the FAN speed, TIMER, IONIZER and LED DISPLAY indicators to 50%
brightness.
NOTE: During dimming mode, pressing the FAN Speed, TIMER or
IONIZER button will automatically reset the LED indicators to full
brightness.
10. Press the button again and the FAN speed, TIMER, and IONIZER LED
indicators shut off while the LED DISPLAY indicator remains at 50%
brightness. Press the button a third time and the FAN speed, TIMER,
and IONIZER LED indicators return to full brightness while the LED
DISPLAY indicator shuts off.
Loading ...
Loading ...
Loading ...