Loading ...
Loading ...
Loading ...
23INSTALLATION
ENGLISH
Removing/Assembling Knob
and knob Rings
Before Removing/Assembling the
Knob and Knob Rings
CAUTION
• Turn off power to the appliance before removing
or replacing the knobs.
• Work with one knob at a time to ensure you
don’t mix up replacement pieces.
• Check the labels on each knob and knob ring
and set the parts out in the order you will
replace them. This will help ensure you don’t put
them on in the wrong order.
• When assembling or disassembling the knob
and knob rings, wear gloves for your safety.
Removing Knob Rings
1 Make sure all knobs are in the OFF position.
2 Choose which knob you will work with first.
3 Remove the knob by grasping the sides and
pulling away from the appliance until the
knob is free from its shaft. You may have to
wiggle it slightly as you pull.
4 To remove the knob ring, turn it
counterclockwise to release the tabs on the
knob ring from the notches.
a Counterclockwise
b Notches
c Tabs
NOTE
• The notches and tabs vary in size. Be sure to
align the tabs with the matching notches when
assembling or disassembling the knob rings.
Assembling Knob Rings
1 Hold the knob ring so that the tabs at the top
and bottom are aligned with the notches on
the mounting plate.
2 Secure the knob ring by rotating it clockwise
so that the top and bottom tabs on the knob
ring are inserted into the notches.
a Clockwise
b Notches
Loading ...
Loading ...
Loading ...