Loading ...
Loading ...
Loading ...
13
www.spirittness.com
STEP FOUR
HARDWARE FOR STEP 4
PART TYPE DESCRIPTION QTY
100 PHILIPS HEAD SCREW
M5 X 10MM
18
102 SHEET METAL SCREW
3.5 x 12mm
6
1. Plug the Computer Cable (No.41) into Console
Assembly (No.40). Install the Console Assembly on top
of the mast of the Console Mast (No.2) (stuff rest cables
into the mast tube), then rmly fasten 4 Tapping Screw
(No.100) using the Screw Driver (No.137).
2. Install the Console Mast Cover (No.68L) & Console
Mast Cover (No.69R) to Chain Cover (No.70L) &
Chain Cover (No.71R), rmly fasten 4 Sheet Metal
Screw (No.102) using the Screw Driver (No.137).
3. Install one Handlebar Cover (No.79L) & one
Handlebar Cover (No.80R) onto upper left Handgrip
Stabilizer Assembly (No.11), rmly fasten 2 Tapping
Screw (No.100) & one Sheet Metal Screw (No.102)
using the Screw Driver (No.137). Repeat with the
Handlebar Cover (No.79L) & Handlebar Cover
(No.80R) & upper right Handgrip Stabilizer Assembly
(No.11).
4. Plug in the Oval End Caps (No.59) onto ends front
stabilizer tube of Main Frame (No.1).
5. Install the Track Slide Wheel Cover A (No.66) & the Track Slide Wheel Cover B (No.67) onto the upper left
Strap Hold Down (No.2) fastening with two Tapping Screws (No.100) using the Screw Driver (No.139). Repeat
with the other 3 sets to the lower left, upper right, and lower right of the Strap Hold Down (No.2).
6. Install the Beverage Holder (No.78) onto Strap Hold Down (No.2) using 2 Tapping Screws (No.100).
Loading ...
Loading ...
Loading ...