Loading ...
Loading ...
Loading ...
15
ADJUSTMENTS
Tension Control Knob
Adjusting the Running Belt
1. The running belt is initially set and adjusted at the factory. However it
may come loose during transportation and/or during use. After
prolonged use, the belt will begin to stretch out.
2. If the running belt begins to shift to either left or right side, the user can
stand on the Anti-slip Pads and hold the handlebar with both hands.
Then use your right or left foot to run on the side of the running belt that
is opposite to the direction of the slip.
3. If the belt begins to slip to the left use your right foot on the right side.
You should see the belt start to correct itself by moving back towards
the center.
4. However, if the running belt is still shifting away from center, use the
5mm Allen Wrench provided and turn the left or right Rear Roller
Adjustment Bolt 1/2 turn in a clockwise direction (turn the same side bolt
that matches the direction of the slip).
Then try running on the center of the running belt again. If the running belt is
still shifting away from center, turn the same Rear Adjustment Bolt another
1/4 turn in the clockwise direction. You should see the belt start to correct
itself by moving back towards the center. Repeat this procedure until the
running belt is centered. If the running belt is slipping during use, then use
the 5mm Allen Wrench provided and turn both the left and right rear roller
adjustment bolts 1/4 turn in the clockwise direction. You should now run on
the running belt to determine if the running belt is still slipping. Repeating the
above procedure until the running belt is not slipping.
Loading ...
Loading ...
Loading ...