Loading ...
Loading ...
Loading ...
9
ASSEMBLY
STEP 1
Place the magnetic treadmill in the upright position.
Remove six Washers (37) and six Bolts (40) from the Left/Right
Stabilizer Tubes (3L, 3R) with the 5mm Allen Wrench with Phillips
Screwdriver provided.
Insert both Left/Right Stabilizer Tubes (3L, 3R) into the Stabilizer
(4), and secure using the six Washers (37) and six Bolts (40) that
were previously removed. Tighten the Bolts (40) with the 5mm Allen
Wrench with Phillips Screwdriver provided.
Tool:
5mm Allen Wrench with Phillips
Screwdriver
Loading ...
Loading ...
Loading ...